Immediately after spraying, empty the sprayer tank. Rinse the inside of the sprayer with clean water, filling at least 1/10 of the sprayer capacity. Completely drain the solution from the sprayer tank. Remove the nozzles, filters and rinse them thoroughly separately in a bucket, use 0.5 liters of product and 10 liters of water as a detergent, then rinse with clean water. Fill half the nozzle and half the sprayer tank with clean water and add the recommended product in the recommended proportion. Fill the reservoir with water and stir for 10-15 minutes. Then drain the cleaning solution through hoses, filters, and pipes. Dry the pipelines and bleed them. Dispose of cleaning solution as required. After this, rinse the inside of the nozzle with clean water, filling at least one tenth of the nozzle’s capacity. Drain the washing solution through hoses, filters, and pipes. Dry the sprayer tank, lines and pump. After the rinsing procedure, refill the sprayer tank with clean water and perform a rinsing test by spraying water on sensitive plants and observing the plants for at least 48 hours. If plant damage is observed, repeat the flushing procedure and repeat the flushing test.