Opti Oil

(SKU P18)

ADJUVANT

APPLICATION ENHANCERS

Emulsifies oily droplets for uniform distribution of OD/EC/EW/SE plant protection products in the tank mix

Enhances pesticide and nutrient distribution, adhesion and absorption in foliar applications with plant-based oil esters and polyether-modified siloxane

Ensures uniform soil moistening, reduces pesticide movement into deeper layers and prevents herbicide leaching in wet conditions

Reduces crop stress from pre-emergent herbicides and minimizes wind drift by ensuring uniform spray particle size

SEND A REQUEST

Penetration agent for pre-emergent herbicides and foliar/soil-applied OD/EC/EW/SE pesticides

MSDS

esters of plant based fatty acids

3-(Polyoxyethylene)propylheptamethyltrisiloxane
SHAKE WELL BEFORE USE!

Prepare the tank mix according to the plant protection manufacturer’s recommendations with 3/4 of the total water. Then add OPTI OIL and the required amount of remaining water (1/4 of the total) into the tank mix, stirring gently as OPTI OIL and water are added.

Spray the solution within 24 hours of preparation.

NOTE: If in doubt, it is recommended to check the compatibility of all mixed products (for residues, layering, etc.) in advance in a small container (min. 500 ml capacity). When mixing, follow the products’ proportions.
Keep the product in its original packaging in a well ventilated area, no lower than 0°C and no more than +40°C temperature, out of the reach of children, away from food, drink, animal feed, electricity, heat sources and direct sunlight. Product may be stored for up to 2 years if kept in its original unopened packaging.

Usage rates

Application rate : 0.4 - 1 L/ha

Use the higher rates where weeds/diseases/pests are well established. Use the higher rate when weeds are under weather stress or at the maximum labeled size for control.

If the amount of water per hectare exceeds 200, then the OptiOil dose is calculated according to volume of water used: 0.2 - 0.5 L OptiOil - 100 L of water.